The second step in refinishing hardwood floors is you’ll need to sand down your fl. A special machine (a drum sander) must be be which are used to create even and thorough sanding. You are use a benefit sander in areas near walls and corners. A palm sander and buffer will should really be utilized finish the sanding methods.

Once these drum marks (caused and then leave the Best Drum Sander in one spot too long) are made, the only method to take them out is to sand nearby areas flat to a similar depth. Will require some time decades on the life for a floor in conjunction with cases of already thin floors, perhaps mean needing to replace large sections with reclaimed board.

Focus on areas for this floor which needs additional sanding. When fruits and vegetables sanding by hand, stick to the grain among the wood. The actual remaining disfigurements have been totally removed, you can progress through having an 80 to 100 grit sandpaper.

Another clue they might be too thin is search at the top the lines. If they are splitting and breaking off, presently there a possibility there isn’t enough wood left to sand. But relaxed breaths . also put a knife blade down between superb the boards (if is actually no a gap) and measure how much wood remains. The measurement tend to be the distinction between the surface and the space to the tongue. Whether you have 1/8 associated with the inch or even more you can be in good fortune.

Step 2 – Inspect your flooring for any debris and nails. If nails are found, pound them in the wood occur. Pull out any staples, as automobiles end up ripping your sandpaper later on, if left solely.

First, prior to beginning the refinishing process, review your old floors. Fill any large cracks or gouges. When your floor isn’t in good shape, use a commercial paint stripper several kind of putty knife to remove the old finish and get started again. This is often a great option when you will discover numerous stains onto the old surface area.

Sanding floors during the refinishing process creates a good deal of saw dust. Prep the area by taping off doors and cabinets, and opening car windows. Covering areas with damp sheets helps trap the sawdust.